REPAIR AND 
MAINTENANCE 
MANUAL 

 


 


Professional 

Pest Control Application 

Equipment 

 

Text Box: B&G Equipment Company
135 Region South Drive, Jackson, GA 30233
800.544.8811 Phone 678.688.5601 Fax 678.688.5633
Text Box: Rev 1/05

 

Table of Contents 

 

 

 

Prime Line Sprayers Pages 

 

 Parts List 3-4 

 Repair Kits 5-6 

 Valve Repair Procedures 7-9 

 Sprayer Troubleshooting 10-11 

 

 

 

Termite Tools Pages 

 

 Parts List 12-16 

 Repair Kits 17 

 Old Termite Tools (Prior to 2005) 18-20 

 Valve Troubleshooting 21-24 

 Ban-Drip Troubleshooting 25 

 

 

 

 

Other Equipment Pages 

 

 Multidose Parts & Troubleshooting 25-26 

 2250 Electric Duster Parts 26 

 PistolPro Parts & Troubleshooting 27-28 

 Duster Parts 29 

 Wood Treatment System Parts 30-31 

 Wood Treatment System Troubleshooting 32 

 Electric Fogger Parts 33 

 Fogger & Duster Troubleshooting 34 

 

 

 


 

 
20 
21
22 
23 
26 
24 
27 28 29 30 
31 32 33 
34 
36 35 
37 
38 
39 
42 40 
43 
44 
45 41 
Text Box: Extenda-Ban Valve
U#U UPartU UDescription
20 VB-147 Valve body 36 VE-154 Valve extension, 9 in.
21 VT-140 Valve trigger VE-155 Valve extension, 18 in.
22 SH-142 Screw housing VE-164 Valve extension, 24 in.
23 TS-141 Trigger screw 37 VS-156 Seat stem spring
24 PN-150 Packing nut (brass) 
PN-150-1 Packing nut (stainless steel) 
PN-150-2 Packing nut (stainless steel)
26 VP-151 Valve packing washers
27 LN-149 Lock nut
28 AS-148 Adjust. screw 
29 SR-161 Snap ring 38 SSL-157 Seat stem nut
30 SL-162 Safety lock nut 39 SS-158 Seat stem
34 SA-143 Strainer housing 40 SP-159 Soft seat gasket
31 NG-146 Nylon gasket 41 5850-CC Multeejet tip assembly
32 MS-145-50 Mesh strainer 42 9751-M Multeejet tip holder
33 SS-144 Strainer support 43 4190 Viton gasket
35 VC-152 Valve cable, 9 in. 44 5800-CC Multeejet CC tip 
VC-153 Valve cable, 18 in. 45 4596 Tip retainer 
VC-163 Valve cable, 24 in. Rev 1/05
Text Box: Ban-Drip Valve
U#U UPartU UDescription
1 VB-40 Valve body 8 PN-47 Brass packing nut
2 VT-41 Valve trigger 9 RP-48 Rod packing
3 SA-42 Mesh strainer 10 RS-49 Rod spring
4 SB-43 Pipe thread strainer 11 SGH-50 Seat gasket holder
5 TS-44 Trigger screw 12 TSG-51 Seat gasket
6 TN-45 Trigger nut 13 TC-52 Tip cap
7 VR-46 Valve rod and pin 14A 800067 Fine fan tip 
14B 5850 Multeejet tip assembly Rev 1/05
Text Box: Extenda-Ban Valve
Text Box: Ban-Drip Valve

 

 
19 
18 
17 
16 
15 
14 
13 
12 
16 
11 
10 
9 
8 
4D 
1 
4B 
4A 
4C 
6 5 
7 
3 
2 
Text Box: Stainless Steel Sprayer
U#U UPartU UDescriptionU
1 T-50 Tank, ½ gallon 8 P-275 Pump handle 
T-100 Tank, 1 gallon 9 P-276 Pump lock spring 
T-200 Tank, 2 gallon 10 P-274 Pump cap 
T-300 Tank, 3 gallon 11 PH-273 Plunger rod, ½ gal. 
T-500 Tank, 5 liter PO-273 Plunger rod, 1 gal.
2 HS-297 Siphon tube, ½ gal. PF-265 Plunger rod, 2 gal., 5 L 
OS-297 Siphon tube, 1 gal. PT-265 Plunger rod, 3 gal. 
TS-297 Siphon tube, 2 gal. 12 P-272 Back plate 
THS-297-01 Siphon tube, 3 gal. 13 NP-277 Polypropylene cup 
FS-297 Siphon tube, 5 liter 14 NP-270 Cup spreader plate
3 HA-298 Adapter, hose 15 P-269A Lock washer
4A TT-1 Tank top (1 gal.) 16 P-269-SS Plunger nut
4B HK-1 J hook 17 P-268 Pump gasket
4C TH-1 Tool hook 18 PH-267 Pump tube, ½ gal.
4D TB-1 Tank bottom PO-267 Pump tube, 1 gal.
5 5700-H Tip holder PF-267 Pump tube, 2 gal.
6 D-50 Hose, 4 ft. red PT-267 Pump tube, 3 gal.
7 D-51-P Hose washer 19 PV-266 Check valve 
Rev 1/05 

REPAIR KITS 

Text Box: EXTENDA-BAN VALVE REPAIR KIT GD-124 (Order # 22050100)
1 PV-266 22027200 Check valve
1 P-268 22028000 Tank gasket
1 NP-270 22028600 Spreader plate
1 NP-277 22029000 Plastic plunger cup
1 P-276 22029900 Lock spring
1 D-51-P 22030400 Washer (hose coupling)
1 4190 22034700 Gasket (Viton)
1 NG-146 22044200 Gasket (Nylon)
3 VP-151 22045099 Valve packing
1 VS-156 22045700 Valve spring
1 SP-159 22046300 Soft seat gasket
Text Box: BAN-DRIP VALVE REPAIR KIT GB – 114 (Order # 22049900)
1 PV-266 22027200 Check valve
1 P-268 22028000 Tank gasket
1 NP-270 22028600 Spreader plate
1 NP-277 22029000 Plastic plunger cup
1 P-276 22029900 Lock spring
1 D-51-P 22030400 Washer (hose coupling)
1 4190 22034700 Gasket (Viton)
1 RP-48 22041100 Packing rod
1 RS-49 22041300 Rod spring
1 TSG-51 22041700 Seat gasket (Teflon)
Text Box: XR GUN REPAIR KIT GT-100 (#22049600)
1 PV-266 22027200 Check valve
1 P-268 22028000 Tank gasket
1 NP-270 22028600 Spreader plate
1 NP-277 22029000 Plastic plunger cup
1 P-276 22029900 Lock spring
1 D-51-P 22030400 Washer (hose coupling)
1 4817 22037800 Valve stem sub-assembly
1 4932 22038200 Brass guide
1 ------- 22038900 O-ring #1
1 4143 22039100 Gasket, copper
1 VS-156 22045700 Valve spring

 

 

 

 

 

 

 

 

 

 

XR GUN FIRST AID KIT FA-600-T (#22050200) 

 

1 PV-266 22027200 Check valve 

1 P-268 22028000 Tank gasket 

1 NP-270 22028600 Spreader plate 

1 NP-277 22029000 Plastic plunger cup 

1 P-276 22029900 Lock spring 

1 D-51-P 22030400 Washer (hose coupling) 

1 4190 22034700 Gasket (Viton) 

1 4817 22037800 Valve stem sub-assembly 

1 4932 22038200 Brass guide 

1 4578 22038700 Brass cap 

1 ------- 22038900 O-ring #1 

1 4143 22039100 Gasket, copper 

1 VS-156 22045700 Valve spring 

 

EXTENDA-BAN VALVE FIRST AID KIT FA – 600-D (Order #22050400) 

 

6 PV-266 22027200 Check valve 

4 P-268 22028000 Tank gasket 

1 NP-270 22028600 Spreader plate 

2 NP-277 22029000 Plastic plunger cup 

1 P-276 22029900 Lock spring 

1 D-51-P 22030400 Washer (hose coupling) 

3 4190 22034700 Gasket (Viton) 

1 TS-141 2204300 Trigger screw 

1 SH-142 22043200 Trigger screw housing 

1 MS-145-50 22043800 Mesh screen (filter) 

2 NG-146 22044200 Gasket (Nylon) 

1 AS-148 22044500 Adjustment screw 

1 LN-149 22044700 Locknut 

1 VP-151 22045099 Valve packing 

2 VS-156 22045700 Valve spring 

1 SS-`58 22046100 Seat stem 

2 SP-159 22046300 Soft seat gasket 

 


 EXTENDA-BAN VALVE 

REPAIR AND MAINTENANCE 

 
2 3 4 5 6 
1 
Strainer 


1. Detach the Valve and Extension from the hose. 

Carefully remove the mesh strainer. 

Squeeze the Trigger to drain all liquid from 

the Valve. 

 

 

2. Remove the Trigger (1), then the Snap ring (5), 

Packing 
washers 
Cable 
Extension 
Safety lock nut (6), the Adjustment screw (4), 

the Lock nut (3), and then the Packing nut (2). 

 

The Trigger can be removed by moving it 

to the back of the Valve. 

 

 

3. Unscrew the extension at the front of the valve. 

The extension can be pulled away from the 

wrench 
9/16 wrench 
valve along with the interior steel cable. 

 

 

4. Packing washers (white) that were at the end of the 

 cable will remain inside the valve. Carefully dislodge 

and remove these washers. 

 

 

5. Remove the tip and nozzle assembly from the end 

 
Soft seat 
gasket 
Tip 
and 
nozzle 
of the extension, be careful to keep the Soft seat 

gasket. 

 

Use 2 wrenches to loosen the tip: one (5/8 “) to 

hold the extension, and a second to loosen the tip 

. 

Note: The extension may become twisted and unusable 

unless 2 wrenches are used to remove the tip. 

 

 
Nozzle 
O-ring 
Inspect the soft seat gasket and the small O-ring 

on Multeejet tips, replace if damaged or worn. Replace 

the nozzle if it is more than old. 

 

 

 

6. Push the cable out the front of the Extension to expose 

 the Spring, the small Lock nut, and the Seat stem. 

Text Box: Rev 1/05

 

 
Seat stem 
Lock nut 
Spring 
Unscrew the Seat stem and Lock nut, and slide off the 

Spring. Place these small pieces in a closed container 

(they are easily misplaced). 

 

 

7. Remove the stainless steel cable by pulling it slowly 

through the back end of the Extension – you cannot 

pull the cable through the front of the Extension. 

 
Remove cable 
out the back 


The threaded end of the cable at the nozzle end is 

short and easily passes through the curve in the 

Extension. The end of the cable at the valve end is 

long and will not pass through the curve. 

 

Replace the cable if it is worn or damaged. 

 
Long end 


 

8. Re-assemble the Extension by inserting the 

short end of the cable into the back so that 
threads are exposed at the nozzle end. 

 

 

9. Slide the Spring onto the end of the cable, then 

 
4 threads down 
Seat stem lock nut 
the Seat stem lock nut. 

 

Screw lock nut only about 4 threads down, 

towards the end of the cable. 

 

 

10. Attach the Seat stem onto the cable, in front of the 

Seat stem 
Seat stem 
lock nut 
Lock nut. Hand tighten Seat stem against the lock 

 nut. 

 

 

 

11. Insert the long end of the cable into the 

front end of the valve. Push the cable 

through the valve until the end is through 

 Long end of 
cable 
the back of the valve. 

 

Tighten the Extension to the valve body. 

 

 

12. Insert 2 or 3 Packing washers onto the 

 cable, then slide on the Packing nut 

Text Box: Rev 1/05

 behind the washers and tighten. 

Use 3/8 or 
7/16 
wrench on 
Packing nut 
Use 2 
washers 
with brass 
Packing 
nut 
Packing washers 


Valves built before 1999 have a 
stainless steel Packing nut that takes 
3/8 wrench, there is no internal O-ring, 

these valves need 3 washers. 

 

 Valves built between 1999 and 2000 

 have a brass Packing nut + O-ring, 

 this nut takes a 7/16 wrench, these 

valves need 2 washers. 

 Lock nut 
Adjustment screw 


 Valves built after 2000 have a stainless 

steel Packing nut + O-ring, this nut takes 

a 3/8 wrench, and these valves require 

2 washers. 

 

 

13. Screw onto the cable the Lock nut and the 

 Adjustment screw. Turn the Adjustment 

screw so the end of the cable is level to 

 
Safety 
lock nut 
Snap 
ring 
Trigger 
insert Trigger 
the top of the slot in the top of the screw. 

Tighten the Lock nut against the screw. 

 

 

14. Attach the valve trigger by inserting it into 

 the space between the Lock nut and 

 Adjustment screw, then insert the Trigger 

 screw. 

 

 

15. Screw the Safety lock nut into the valve 

 
Soft seat 
gasket 
squeeze 
Trigger to 
retract cable 
body, and then attach the Snap ring. 

 

 

16. Attach the tip and nozzle to the end of the Extension, 
make certain the Soft seat gasket is facing correctly. 

 The small end faces the Extension. 

 

Press the Trigger to retract the Seat stem into the 

Extension, then attach the tip and nozzle. 

 

 

 

Text Box: Rev 1/05

TANK SPRAYER PROBLEMS AND SOLUTIONS 

Siphon tube 
(#22025700) *Check 
valve 
*Pump 
gasket 
*Hose 
washer 
*Plastic 
cup 
*Spreader 
plate 
*These parts are in 
Gasket Kit GD-124 
Mesh strainer 
(#22043800) 
Soft seat 
gasket 
Nozzle 
Text Box: P. Tank is not holding pressure; pump
is working but no pressure remains 
in the tank.
S. Check Pump gasket, replace if cracked.
Text Box: P. Tank is not getting pressure; the pump
seems to be working but no pressure 
builds in the tank.
S. Grease Plastic cup in pump tube, or 
replace cup and Spreader Plate.
Text Box: P. Pump cylinder fills with liquid, pumping is
difficult.
S. Clean dirt from bottom of pump tube,
replace Check valve at bottom.
Text Box: P. Won’t spray; tank holds pressure but
there is no spray from the nozzle,
UaU UnewU UsprayerU.
S. Replace Hose washer, it may have been
damaged when hose was attached to tank; the junction may have been over-tightened!
Text Box: P. Tank holds pressure, but there is no
spray from nozzle (old sprayer).
S. (1) Siphon tube is clogged or cracked, it 
must be cleaned or replaced. 
(2) Clean the mesh Strainer at the end of
the hose near the valve. 
(3) Clean the nozzle with a toothbrush. 
(4) Clean or replace Soft seat gasket
at end of the extension.
Text Box: Rev 1/05

 TANK SPRAYER PROBLEMS AND SOLUTIONS 
(Page 2) 

Hose 
washer 
Siphon 
tube 
Packing 
nut 
2 washers for 
brass 
Packing nut 
3 washers for 
stainless steel 
Packing nut 
Soft seat 
gasket 
O-ring 
Correct 
position 
Valve spring Cable 
Seat stem 
Text Box: P. Valve is leaking around the Packing nut,
and the handle is wet.
S. (1) Tighten the Packing nut. 
(2) Replace the valve Packing washers. 
U2 washersU with brass Packing nut 
U3 washersU with stainless steel Packing nut
Text Box: Rev 1/05
Text Box: P. Hose is leaking at the connection with 
the tank; leaks when tank is 
pressurized.
S. Replace the Hose washer at the end of
the hose; do not over-tighten the 
connection when reconnecting the 
hose to the tank.
Text Box: P. Extension is leaking at the tip, a constant
drip from the tip. 
S. (1) Clean or replace nozzle O-ring. 
(2) Clean end of Seat stem. 
(3) Clean or replace Soft seat gasket. 
(4) Replace the Valve spring.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Versatool Valve 

 

# Part Order # Description 

 

Valve 1549 22071649 Valve assembly 

1 1544 22071644 Valve body 

2 VT-618 22059700 Spring rod 

3 1-1964 33000090 O-Ring 

4 VT-619 22059800 Valve rod 

5 VT-621A 22060000 Seat gasket 

6 VT-622A 22060100 Seat gasket holder 

7 VT-611 22059000 Valve trigger 

8 TN-45 22040500 Hex nut 

9 1138 22071038 Spacer 

10 VT-609 22058800 Trigger pin 

11 TN-45 22040500 Hex nut 

12 VT-612 22059100 Rod screw 

13 VT-615 22059400 Trigger lock 

14 VT-616 22059500 Trigger lock spring 

15 VT-617 22059600 Trigger lock screw 

16 --------- 22067518 Adapter + washer 

Kit 22028910 Valve rebuild kit 

 (Includes 3,5,6,9,11,14) 

VersaGun Valve 

 

# Order # Description 

 

Valve 22067500 Valve assembly 

1 22067514 Locknut 

2 22067513 Actuator block 

3 22067511 Packing screw 

4 22067517 Sealing washer 

5 22067510 Packing gland 

6 22067512 Actuator pin 

7 22067509 Spring spacer 

8 22067514 Locknut 

9 22071285 Pipe plug 1/8 NPT 

10 22067506 Versagun handle 

11 22067516 Trigger pin 

12 22067505 Versagun body 

13 22067514 Locknut 

14 22067515 Versagun trigger 

15 22024410 Shutoff spring 

16 22067507 Shutoff stem 

17 22067503 Adapter ½ 

18 22067526 Hose fitting 

19 22067527 Hose fitting washer 

20 22070725 0-160 gauge 

21 22067518 Adapter + washer 

Kit 22067554 Valve rebuild kit 

 (Includes 1,4 17) 

21 
20 
19 
18 
17 
16 
15 
14 
13 11 12 
10 
9 
8 
7 
6 
5 
4 
2 3 
1 
VersaGun 
Versatool 16 
15 
14 
13 
12 
11 
10 
9 
8 
7 
6 
5
4 
3 
2
1 

2 
16 30 

29 22 

29 
10 
11 
23 24 

11 15 

21 27 

24 

9 
25 

4 

31 8 3 

2 

1 

 

SRG AND QCG GUNS 

 
# Part Description 

Rev 1/05 

 
27 
10 

 

Standard Tip Kit 

 

# Part Computer # Description 

 

1 457 11007457 void 2 gpm 

2 455 11007455 360° 5 gpm 

3 454 11007454 360° 2 gpm 

4 453 11007453 180° 2 gpm 

5 451 11007451 360° 2 gpm 

Standard Pipe Set 

 

# Computer # Description 

 

6 22067797 1/8” adapter 

7 22067798 3/8” adapter 

8 22067906 5/8” x 40” galvanized 

9 22067912 7/16” x 40 

10 22067904 7/16” x 12” 

15 22060850 Splash guard 

SERIES 400 TOOLS: PIPE SETS, EXTENSION PIPES, AND TIPS 

Professional Pipe Set 

 

# Computer # Description 

 

6 22067797 1/8” adapter 

7A 22067798 3/8” adapter 

10A 22071427 7/16” x 12” 

11 22071428 7/16” x 40 

12 22071429 5/8” x 40” 

15 22060850 Splash guard 

 22071605 Check Valve (not shown) 

 for 7/16 Pipes. 

Extension Pipes 

 

# Computer # Description 

 

13 11007460 7/16” x 40” 

14 11007465 5/8” x 40” 

Standard Pipe Set Professional Pipe Set 
Extension 
Pipes 
Standard 
Tip Set 
Splash 
guard 
Cone seal 
1 2 3 4 5 
7/16” 1 gpm Tips 
#450 11007450 360° 
#453 11007452 180° 
6 
7 
8 9 
10 
11 12 
13 14 
15 
6 7A 
10A 
For Cone Seal Parts see Page 14 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

484/486 Versatool 

 

# Part Order # Description 

 

1 1549 22071649 Valve assembly 

2 1544 22071644 Valve body 

3 VT-618 22059700 Spring rod 

4 1-1964 33000090 O-Ring 

5 VT-619 22059800 Valve rod 

6 VT-621A 22060000 Seat gasket 

7 VT-622A 22060100 Seat gasket holder 

8 VT-611 22059000 Valve trigger 

9 VT-609 22058800 Trigger pin 

10 TN-45 22040500 Hex nut 

11 1138 22071038 Spacer 

12 VT-612 22059100 Rod screw 

13 VT-615 22059400 Trigger lock 

14 VT-616 22059500 Trigger lock spring 

15 VT-617 22059600 Trigger lock screw 

16 22070917 Adapter 

17 1340 22071940 Pipe assembly 

17a Not Shown 22071950 Check valve assm 

 Check valve fits between parts 17 & 18 

 

18 1390 22071390 Tip (6 hole) 

18 1542 22071642 Fan tip 2 gpm. 

 Kit 22028910 Valve rebuild kit 

 (Includes 4,6,7,10,11,14) 

Rev 1/05 

Adjustable Cone Seal 

 

# Part Order # Description 

 

1 ACS 22071775 Adj. Cone Seal 

2 1145 22071045 Retaining screw 

3 1380 22071380 Lock knob 

4 ACS30 22071776 Foot ram 

5 ACS25 22071771 Cone seal 

6 1381 22071381 Lock bolt 

 
6 
1 
2 3 
4 
5 

 

 Sub-Slab Injector 

 

# Part Description 

 

1 VT-610 Valve assembly 

2 VT-618 Rod spring 

3 I-1964 O-Ring 

4 2673 Valve rod 

5 VT-611 Valve trigger 

6 VT-609 Trigger pin 

7 TN-45 Hex nut 

8 1138 Spacer 

9 VT-612 Rod screw 

10 VT-615 Trigger lock 

11 VT-616 Trigger spring 

12 VT-617 Trigger screw 

13 #3 Wing nut 

14 2674 Extension rod #4 

 2675 Extension rod #14 

15 2668 Shaft #4 

 2669 Shaft #14 

16 #4 Lock sleeve #4 

 #14 Lock sleeve #14 

17 SSL-157 Seat stem lock nut 

18 2676 Seat stem 

19 2677 Seat gasket 

20 2678 Stud 

21 #5 Compression ring 

22 #6 Expansion ring 

23 1370 Tip adapter 

24 LDT-36 Extension, 6 in. 

25 1390 360, 6 hole tip, 2 gpm 

26 1542 180, fan tip, 2 gpm 

27 1389 360, 6 hole tip, 1 gpm 

28 1543 180, fan tip, 1 gpm 

Adjustable Cone Seal 

 

# Part Order # Description 

 

1 ACS 22071775 Adj. Cone Seal 

2 1145 22071045 Retaining screw 

3 1380 22071380 Lock knob 

4 ACS30 22071776 Foot ram 

5 ACS25 22071771 Cone seal 

6 1381 22071381 Lock bolt 

Rev 1/05 

 
6 
1 
2 3 
4 
5 
25 26 
27 
28 

Termite Tool Repair Kits 

 

 

 

 

 

 

 

VERSAGUN REPAIR KIT (Order # 22067554) 

 

1 -------- 22067503 Adapter ½-20 

1 -------- 22067514 Locknut, Versagun 

1 -------- 22067517 Seal, Versagun 

 

VERSATOOL REPAIR KIT (Order # 22028910) 

 

2 1-1964 33000090 O-Ring 

1 VT-622A 22060100 Seat gasket holder 

1 TN-45 22040500 Hex nut 

1 VT-616 22059500 Trigger lock spring 

1 VT-621A 22060000 Seat gasket 

1 1138 22071038 Spacer 

 

SRG and QCG REPAIR KIT 1 34555-V (Order # 22067848) 

 

1 HWN 22067536 Hose gasket 

1 34516-V 22067714 Gasket, Viton 

1 34517-V 22067715 O-ring PT-6 

1 34503-V 22067740 O-ring, Viton 

1 34506-V 22067743 O-ring, Viton 

1 34507 22067744 O-ring, back-up 

 

SRG and QCG REPAIR KIT 2 34601-V (Order # 22067748) 

 

1 HWN 22067536 Hose gasket 

1 34516-V 22067714 Gasket, Viton 

1 34517-V 22067715 O-ring PT-6 

1 34510 22067728 Valve seat 


VERSAGUN PROBLEMS AND SOLUTIONS 

 

 
Packing 
Washer screw 
Packing 
gland 
Shutoff 
stem 
Tip with 
gasket 
Packing 
screw 
Copper 
Packing washer 
Lock nut 
Text Box: P. Gun is leaking at the junction with the 
soil rod.
S. Remove the soil pipe and tighten the 
tip to the gun. 
If leak continues, loosen and remove
the tip, clean the exposed end of
the Shutoff stem and the white
gasket in the center of the tip. 
If leak continues, replace the tip, the 
gasket can not be replaced 
separately.
Text Box: P. Leaking occurs at the back of the Valve.
S. Loosen the Lock nut (1/4 turn) at the 
back of the gun – this will re-set the 
Shutoff stem to the gasket in the tip. 
If leak continues, the Packing screw 
may have to be removed and the 
packing replaced.
Text Box: Rev 1/05

VERSATOOL PROBLEMS AND SOLUTIONS 

 

 
Valve rod 
Valve rod 
O-rings 
Rod spring 
Seat gasket 
Seat gasket 
holder 
Trigger 
O-rings 
on Valve 
rod 
O-rings 
may be 
worn or 
damaged 
and be the 
cause of a 
leak 
Text Box: P. Tool is leaking from the tip.
S. Remove the soil pipe and in the base of
the Valve tighten the Seat gasket
holder with a 5/32 hex wrench. 
If tool continues to leak, remove the 
Seat gasket holder (5/32 hex wrench)
and replace the (white) Seat gasket. 
If tool continues to leak, replace O-rings 
on the Valve rod. Disassemble 
the Trigger, then remove the Seat 
gasket holder; push the Valve rod 
out from above.
Text Box: P. Leaking occurs around the soil pipe 
connection to the Valve.
S. Remove the soil pipe and in the base of
the Valve tighten the Seat gasket
holder with a 5/32 hex wrench. 
If leak continues, remove the Seat 
gasket holder (5/32 hex wrench)
and replace the white seat gasket.
Text Box: P. Leaking occurs around the Rod spring
at the center of the Valve handle.
S. Replace O-rings on the Valve rod. Disassemble the Trigger, then 
remove the Seat gasket holder; 
push the Valve rod out from above.
Text Box: Rev 1/05

QCG AND SRG GUN PROBLEMS AND SOLUTIONS 

 

Gland nut 
Viton 
Gasket 
Viton O-ring 
Shutoff 
valve 
Valve 
seat 
Nosepiece 
adapter 
QCG 
SRG 
Pattern 
valve 
Viton 
O-ring 
Teflon 
O-ring 
Viton O-ring 
Pattern adjust. 
sleeve 
Nozzle 
nut 
Nozzle 
Text Box: P. Gun is leaking from the tip, around the 
junction of the Nosepiece and the 
body of the gun.
S. Remove Nosepiece-adapter and inspect 
the Shutoff valve and the Valve seat
(gasket). Clean the tip of the
Shutoff valve, and turn over the
Valve seat (gasket). 
If leaking continues, replace the 
Valve seat (gasket).
Text Box: P. Leaking occurs at the back of the gun
around the large brass nut.
S. Tighten the Gland nut at the back of the
gun. If leaking continues at this site, disassemble the gun and replace
the gasket and O-ring associated
with the Gland nut.
Text Box: P. Leaking occurs around the Pattern
adjust. sleeve of SRG gun.
S. Remove the Nozzle nut and inspect the 
O-ring, remove dirt from around the Nozzle.
Remove Pattern adjustment sleeve
and inspect Viton and Teflon O-rings.
Replace if damaged or worn. 
Note: Pattern valve has reversed thread to 
open.
Text Box: Rev 1/05
Text Box: QCG REPACKING KIT – 34601-V: 
1 Valve seat 
1 Viton gasket 
1 Viton O-ring

SSI #4, #14 PROBLEMS AND SOLUTIONS 

 

 
Shaft 
Valve 
rod 
O-rings 
Seat 
gasket 
Seat 
stem 
Rod 
spring 
Text Box: Rev 1/05
Text Box: P. Tool is leaking from the tip or just above.
S. Tighten tip with a wrench. 
If tool continues to leak, replace the 
Seat gasket (#22071977). 
If tool continues to leak from the tip, 
check the Seat stem and replace 
if damaged (#22071976).
Text Box: P. Leaking occurs around the Rod spring 
connection to the Valve.
S. Remove the pipe at the wing nut and
disassemble the Valve to free the
Rod spring. Replace the 2 O-rings
in the Valve rod. 
Text Box: P. Leaking occurs around the pipe 
connection to the Valve.
S. Tighten the pipe into the Valve body. 

BAN-DRIP AND BAIT GUN 

 

PROBLEMS AND SOLUTIONS 

 

 

Packing 
nut 
Multeejet tip 


Seat gasket 
holder 
Seat gasket 
Valve rod 
Rod spring 
Packing nut 
Rod packing 
Strainer 
Trigger 


 

Knob 
release 
lever 
Plunger 
rod 
Dose 
adjust. 
knob 
Text Box: P. Not enough or no bait delivered at 
setting No. 1.
S. Tip may be clogged. Some baits do 
not work well at setting No. 1, a 
larger setting may be necessary.
Text Box: P. Gun is leaking from the tip.
S. Replace the Seat gasket. Loosen the
Tip cap. Pull the Trigger and remove
the Tip cap and nozzle, then insert a 
new gasket, pull the Trigger and 
re-assemble the tip.
Text Box: P. Leaking occurs around the Packing 
nut and Trigger.
S. Tighten the Packing nut; if leaking
continues, then replace the Rod
packing. Remove the Packing nut
and then remove the Rod packing.
Text Box: P. Trouble releasing Plunger rod.
S. Lightly depress the Knob release lever 
at top of gun, pull back the rod and 
apply 3-in-1 oil. Move oiled rod back 
and forth. (Squeeze Trigger along 
with the Knob release lever.)
Text Box: Rev 1/05

 

21 
20 
19
2 3 
6 
7 
15 
12 
10 13 
9 
14, 22 8 
6 
7 
3 
17 
5 4 
2 
11 
18 16 
1 
10 
23 
22 
20 
19
18 
16 17 
15 
14 13 
11, 12 
9, 10 
8 
7 
6 
5 
4 
3 2 
1 
Text Box: Multi-Dose Bait Gun
U#U UOrder #U UDescriptionU
1 24020129 Screw, self-tapping
2 24020103 Body, gun
3 24020112 Plunger, syringe
4 24020111 Plunger rod
5 24020105 Trigger
6 24020125 Spring, front lock plate
7 24020114 Plate, front lock
8 24020124 Spring, upper rear lock
9 24020115 Plate, rear lock
10 24020152 Screw, #8 32 x 1/8”
11 24020107 Knob, rod release
12 24020147 Screw, #8 32 x 1/8”
13 24020127 Spring, lower rear lock
14 24020121 Screw, dose adjusting
15 24020116 Dose adj. knob asmbly
16 24020126 Spring, dose adj. knob
17 24020122 Nut, modified
18 24020128 Screw
19 24020113 Knob, plunger
20 24020146 Washer, wavy spring
21 Label
22 24020119 Label, dose adjusting
23 24020153 Body and pin assembly
Text Box: Model 2250 Electric Dust-R
U#U UPartU UDescriptionU
1 2251 1.5 gallon tan
2 2255 Cap with liner
3 2256 Flange
4 2257 Flex hose
5 2258 Cuff
6 2260 Screw, #6
7 2261 Clamp
8 2252 Cover
9 2305 Motor guard
10 2306 Screw, #8
11 2253 Duct
12 2308 Screw, #10
13 2309 Motor, 110V
14 2311 Switch, 110V
15 2314 Cord, 110V
16 2315 Strain relief
17 2259 Extensions
18 2263 Discharge unit
19 2264 Void treat discharge
20 2265 Void treat hose
21 2262 Cover with liner
22 990 Boot/switch
Text Box: Model 2250 Electric Dust-R
Text Box: Multi-Dose Bait Gun
Text Box: Rev 1/05

PistolPro 700 Series 

1 1A 
2 
3 
4 
5 
6 
8 7 
9 
10 
11 
12 
13 
14 
15
16 
17 
18 
19 
20 
21 
Text Box: 
U#U UOrder #U UDescriptionU
1 SP-159 Soft seat gasket 
1A 22032720 200 mesh screen
2 22067312 30-L Gunjet
3 22071266 Reducing nipple
4 24010016 Adapter
5 22071801 Quick Connect
6 22054900 Air valve
7 24010003 Gauge, 160 psi
8 24010002 O-ring
9 24013050 Hose barb fitting 
24010055 Barb (Model 770&775)
10 24013052 Siphon hose(1Pint) 
24010039 Siphon hose (1quart)
11 24010710 Bottle + cap, 1 pint 
24010715 Bottle + cap, 1 quart
12 24013050 Siphon weight
13 24010005 Adjusta-tip assembly
14 24010021 Aerotip
15 22049468 4- WayTip assembly
16 22049200 C+C straw
17 22071785 Injection needle, 2 “
18 TC-160 Tip cap
19 24010059 Needle assembly
20 23083601 Nozzle (730&735)
21 22036655 Foam tip assembly

PISTOL PRO SYMPTOMS AND SOLUTIONS 

 

Hose barb 
O-ring 
Siphon 
tube 
Foam tip 
with mesh 
screen 
Soft seat gasket 
Reducing 
nipple 
Termite tip 
(foam) 
Tip 
holder 
Tip cap 
Tip 
retainer 
Siphon Bottle 
tube 
weight 
Reducing 
nipple 
Safety 
lock 
Tip 
retainer 
Text Box: P. Foam from Foaming tip is watery.
S. Adjust the tip, increase the amount of 
foaming liquid in bottle, or clean 
the mesh screen. Recommended Operating Pressure – 20psi.
Text Box: Gun is leaking from the front of the tip.
S. Tighten Tip holder or Tip cap, and Tip 
retainer. Check nozzle for deposits.
Text Box: Gun is leaking from behind the tip.
S. Tighten Tip holder; remove tip and 
clean or replace Soft seat gasket.
Text Box: Leaking occurs at bottom of gun, or 
the top of the bottle.
S. Tighten Reducing nipple connection to 
the gun. 
Tighten Hose barb, check O-ring for 
damage and replace (#24010002) 
Remove and replace Teflon tape on 
the fittings.
Text Box: Rev 1/05
Text Box: P. No foam is produced by the Foaming tip 
or the Termite tip.
S. Increase amount of foaming liquid in the 
bottle. Check the Siphon tube and 
weight at bottom.

 

Model - 1151-M Mini-Dust-R 

 

# Part Description 

 

1 MDR-1 Cap 

2 MDR-2 Collar 

3 1174 Screw, flat head #6 

4 MDR-4 Plunger 

5 DR-020 Pump gland 

6 MDR-7 Barrel 

7 MDR-8 Barrel seal 

8 MDR-9 Closure 

9 MDR-10 Stopper assembly 

10 MDR-11 Tip, offset fan 

11 MDR-12 Tip, straw 

12 MDR-13 Extensions (3) 

13 VT-616 Spring 

14 MDR-15 Ball 

Model - 1152- A Hand Dust-R 

Long-Reach Granular Dust-R 

 

# Part Description 

 

1 DR-003 Bottle – 1152-A 

2 24050001 Bottle – Long Reach 

3 DR-027 Outlet 

4 2273 O-Ring 

5 DR-029 Washer 

6 DR-028 Locknut 

7 DR-012 Barrel 

8 DR-010 Seal, barrel 

9 DR-009 Bottle cap 

10 DR-006 Bottle seal 

11 DR-008 Valve 

12 DR-007 Valve plate 

13 DR-005 Valve cap 

14 1224 Screw, hex head #8 

15 MDR-4A Plunger 

16 DR-020 Pump gland 

17 MDR-2 Collar 

18 MDR-15 Ball 

19 VT-616 Spring 

20 1174 Screw, flat head #6 

21 MDR-1 Cap 

22 DR-002 Short extension 

23 DR-011 Long extension 

24 041 Tip, pencil 

25 042 Tip, straw 

26 DR-001 Stopper assembly 

27 24050010 Stopper assembly 

28 24050016 Extension clip 

29 24050008 Granular outlet 

30 24050012 Granular extension 

31 24050011 Extension and coupling 

32 24050014 Extension Velcro 

33 24050015 Barrel Velcro 

Model 1151 

Model 1152-A 

Long-Reach 
Granular Dust-R 

Rev 1/05 

1
2 
3 
4 
5 
6 
7 
8 9
10 
11 
12 
13 
14 
1 2 
3 
5 4 6 
7 
8 
18 21 16 
19
20 
22 
23 
24 25 
26 
11 13 
14 
9 10 12 
15 
17 
21 16 
19 
18 
20 7 
8 9 10 11 12 
13 
14 
23 
6 5 4 
3 
24 25 
27 26 
31 
30 
29 
15 
33 
22 
3 32 
32 
6 
5 
4 
17 
28 

 

Wood Treatment 

System 

Wood Treatment System, 
30-L Gun and Tips 

Wood Treatment System, 
Regulator Replacement 

Rev 1/05 

17 
15 
36 
35 
30 
34 
16 17 
18 
7 
9 
20 8 
13 
11 
2 
3 
12 
20 
14 
12 
19 
1 
37 
5 
6 
32
30 
29 
30 
27 
35 
28 31 
21 
20 
41 
30 
23 
28 
24 
24 
25 
26 
22
33 
22 
10 
4 
8 
24040085 24040078 
22070724 
24040107 
22070850 
24040106 22071801 

Wood Treatment System 

 

# Order # Description 

 

1 24040060 Cart assembly 23 24040057 Adapter, foam siphon 

2 24040100 Bumper 24 22071801 Plug, quick connect 

3 24040101 Screw, #10 25 24040057 Adapter, foam siphon 

4 24040062 Bracket, tank 26 24040093 O-ring 

5 24040061 Rail, cart 27 24040078 Tee, street 1/8 NPT 

6 24040063 U bolt 28 24040085 Valve, pressure relief 

7 22071743 Band, tank 29 22026700 Nipple, hex 1/8 NPT 

8 22071751 Screw, Phillips 30 22070850 Elbow, street 1/8 NPT 

9 24040080 Screw, Phillips 31 22025300 Adapter, liquid siphon 

10 24040084 Wing nut 32 22070724 Gauge, liquid filled 

11 24040061 Rail, cart 33 22071803 Fitting, 3/8 hose NPT 

12 24040081 Screw, Phillips 34 24040093 O-ring 

13 24040082 Washer, fender 35 22071266 Nipple, reducing 

14 22071752 Nut, hex 36 24040088 Air chuck, quick conct 

15 24040065 Compressor, hose 37 24040102 Handle, grip, U-bolt 

16 22071802 Socket, quick connect 

17 24040079 Fitting, hose 1/8 NPT 

18 33000467 Clamp, hose 

19 24040051 Tank 

20 22028000 Seal, tank 

21 22070600 Cap + handle assb 

22 22025901 Siphon tube Rev 1/05 

 

 

 

 

Wood Treatment System Gun and Hose 

 

# Order # Description 

 

41 24040067 30 ft. hose, 3/8 I.D. 53 24040071 Tip, straight foam 

 24040086 50 ft. hose, 3/8 I.D. 54 22033100 Cap, tip 

42 95137800 Fitting, 3/8 hose 55 24040074 Tip, wall void foam 

43 22067312 Gunjet, 30L 56 24050006 Stopper, wall void tip 

44 22046350 Gasket, seat 57 24040077 Tip, wood injection 

45 22037400 Adapter, Ό NPT 58 22071738 Tee, street Ό street 

46 22071813 Socket, quick conct 59 22070540 Elbow, street Ό NPT 

47 24040069 Straight tip assmb 

48 24040073 Wall void tip assmb 

49 24040076 Wood tip assmb 

50 24040072 Dual tip assmb 

51 22071809 Plug, quick conct 

52 22033900 Body, nozzle 

 Rev 1/05 



WTS PROBLEMS AND SOLUTIONS 

 

Seat gasket 
Hose 
fitting 
Clamp 
Quick 
connect 
Tank 
gasket 
Pressure 
regulator 
Siphon 
tube 
Text Box: P. Tank not hold pressure.
S. Tighten cap; check the Tank gasket and 
replace if cracked or worn. 
Check all Quick-connect plugs for 
proper fitting and an air leak.
Text Box: P. Tank not getting pressure.
S. Compressor not operating properly. 
The regulator may not be adjusted 
properly, Upull knob outU, then UturnU
to Uthe rightU increase pressure.
Text Box: P. Gun sprays only air, no liquid or foam.
S. Check tank to be certain there is 
sufficient liquid in tank. 
Check Siphon tube for cracks, replace 
if damaged.
Text Box: P. Leaking occurs around the Hose fitting or 
around the tip fitting.
S. Tighten the Hose fitting to the gun, tighten the hose clamp. 
Replace the Seat gasket, be certain to 
install the gasket with the narrow end 
toward the gun.
Text Box: Rev 1/05
Text Box: P. Compressor will not start.
S. Check gauge, there may be too much
pressure in tank, pull the release
valve to reduce pressure.

 

Ultra-Lite 2300, 2400 Fogger 

 

# Part Description 

 

1 2386 Cap and O-ring 

2 2407 Housing 

3 990 Switch boot 

4 2311 Switch 110V 

 2340 Switch 220V 

5 2336 Ring 

6 2329 Screw 

7 2346 Venturi 

8 2326 Flat washer 

9 2308 Screw 12-24 x 3 Ό 

10 2315 Strain relief 

11 2314 Electric cord 110V 

 2341 Electric cord 220V 

12 2330 O-ring (Model 2400) 

12 2337 Plug (Model 2300) 

13 2331 Valve rod, knob (Model 2400) 

14 2332 Clip (Model 2400) 

15 2334 Spring (Model 2400) 

16 2333 Sleeve (Model 2400) 

17 2316 Wire connector 

18 2418 Spring 

19 1246 Angle barb 

20 2327 Grounding screw 

21 2323 Motor 110V Single 

 2324 Motor 220V Single 

22 2305 Motor guard 

23 2306 Screw 

24 2375 Supply tube, lower 

25 2312 Strainer 

26 1241 Tank barb 

27 2401 Supply tube, upper 

28 2404 Tank 

2600 Flex-a-Lite Fogger 

 

 

# Part Description 

 

1 2332 Clip 20 2311 Switch 

2 2334 Spring 21 990 Switch boot 

3 2346 Venturi 22 2315 Strain relief 

4 2331 Knob asmbly 23 2386 Cap and O-ring 

5 2330 O-ring 24 2384 Nozzle asmbly 

6 2333 Sleeve 25 2358 Tube retainer 

7 2329 Screw 26 2319 Pressure tube 

8 2352 Screw 27 2312 Strainer 

9 2357 Hex nut 28 2316 Wire connector 

10 2359 Spacer 29 1241 Tank barb 

11 2353 Nozzle 30 1246 Angle barb 

12 1433 Spring clamp 31 2375 Supply tube 

13 2354 Screw 32 2327 Ground screw 

14 2385 Hose asmbly 33 2323 Motor 110/220 

15 2326 Flat washer 34 2305 Motor guard 

16 2306 Screw 35 2306 Screw 

17 2349 Pressure tube 36 2406 Tank 

18 2374 Supply tube 37 2408 Housing 

19 2314 Electric cord 38 1145 Screw 

 39 2355 Mount plate 

2600 Flex-a-Lite Fogger 

Rev 1/05 

8, 9, 10 
12 
13
15, 16 
13 
11 
19 
18 
14 
4 1,5 
17 
23 
20, 21 
8, 9, 15 
38 25 
39 
36 
27 
22 
37 
28 
12 
29 
30 
31 
32
34 
35 
33 
24 6 
26 
22 
21 
23 
20 
24 
19 
18 
17 
28 25 
26 
27 
16 
15
14 
13 
12 
11 
10 
8, 9 
1 2 
3, 4 5 
6 7 

2600 FOGGER AND GRANULAR APPLICATOR 
PROBLEMS AND SOLUTIONS 

 

Motor guard 
Motor 
screw 
Flex 
hose 
Cover 
Cap with 
liner 
Cap with 
liner 
Nozzle 
Flex hose 
Valve knob 
Motor 
guard 
Motor 
housing 
Text Box: Rev 1/05
Text Box: P. Liquid forms around the base of the
Motor housing, around the mounting
screws.
S. The unit may have been placed in a 
wet location, and water has entered 
the motor. Operate the unit in a dry 
location to remove water. 
Text Box: P. The unit becomes very warm (hot) 
during operation.
S. Remove the Motor guard and clean the 
filter below the motor. 
Text Box: P. Motor is erratic or has apparently burned 
out.
S. The unit has been operated in dusty or 
wet locations and the motor has been contaminated. 
The unit was not properly shut down 
by turning off at the knob UbeforeU 
turning off the motor.